Thermex SPR 80 V
Thermex SPR 80 V | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
6 5 3 15 |
It was purchased for installation in a production room. At home, I already had a similar storage electric water heater and I am aware of how slow such systems can be. Therefore, I chose one of the fastest, in terms of heating speed, models. The first plus of the purchase is its well-deserved trademark. Personally, I have known her for about 20 years and this is really high-quality equipment. Secondly, this water heater has an exceptionally good ratio of water volume and electric power. In low-cost models of 50-liter boilers, heating elements of 1200 W are sometimes found, and here a 30-liter volume is heated by a 2500-watt heater. True, the manufacturer calls this mode forced, and the nominal one gives about 1500 W, but this is already particular, the main thing is that you can get warm water from this boiler in 15 minutes, and full hot water comes out in a little more than 30 minutes. If you use the nominal mode, then the time is stretched almost in direct proportion to the power. The temperature regulator here is mechanical, the simplest and most foolproof. It always works, regardless of voltage and its fluctuations. Thirdly, traditionally for Termex, the water heater is well protected from corrosion. Inside the robust steel tank there is a glass-ceramic coating, i.e. the first protective barrier, and in addition to this, a magnesium anode is installed, which provides sacrificial electrochemical protection. The body layout of this model is not very successful. I believe that storage boilers of small volume should have a smaller depth. In this case, it will be easier to find a suitable place for installation. Six months later, when heated, a distinct noise appeared, only scale had grown. |
мы никак не можем найти нормальную инструкцию по разборке и замене анода... в сервисном центре сказали лаконично: ищите анод 200 на шпильке. {-nl-}кто разбирал и менял анод - поделитесь секретами, пожалуйста!!! как это вообще делать? какую под анод прокладку надо? какие ключи должны быть?...{-nl-}заранее благодарю! да обычный нагреватель. вроде греет. но долго. и если не ждать 2 часа - горячая вода быстро кончается, и докупываешься холодной(( получить какую-либо сервисную информацию невозможно - в колл-центре очень скупы на комментарии. а в городе нету ни одного специалиста, кого можно было бы пригласить - хотя раньше был целый сервисный центр!... Татьяна Воронович: use Thermex Sprint month or more |
2 out of 30 user review(s) shown
10 more user review(s)
Additional features water heater Thermex SPR 80 V:
- Heating indicator
- Model 30 SPR-V — volume 30 L, heating time — 40 min
- Model 50 SPR-V — volume 50 L, heating time — 65 min
- Model 100 SPR-V — volume 100 L, heating time — 130 min
Thermex SPR 80 V configurations
Price for Thermex SPR 80 V | ||||
---|---|---|---|---|
Thermex SPR 30 V | from 4 470 ₴ | 4 offers | ||
Thermex SPR 50 V | from 5 400 ₴ | 3 offers | ||
Thermex SPR 80 V | from 6 500 ₴ | 2 offers | ||
Thermex SPR 100 V | from 7 500 ₴ | 3 offers |
We recommendCompare using chart →