FSP CMT270 black

dark as night

FSP CMT270 is a strict-looking, but at the same time, made according to the latest technological trends, full-size computer case in the Midi-Tower format (that is, with support for Full-ATX motherboards and less). The body base is made of thick SPCC sheet steel, coated with matte anti-static black paint. The front panel is plastic with perforation for better air intake (you can install three 12-cm fans).

viewing window

The side panel of the FSP CMT270 is made transparent and with a fairly strong tint — it is a tempered glass that is resistant to scratches and moderate impacts. Moreover, the glass is attached without screws (it drives along the rails). Interestingly, the power supply compartment is made deaf and not visible through the glass for greater accuracy of the PC exterior. The case is raised on high and wide legs, thanks to which it is stable and with improved air intake from below.

Air and water

From above, the FSP CMT270 blowout holes are covered with an easy-to-remove dust filter on magnets — here you can install a pair of 12 cm turntables or a two-section dropsy with a 24 cm radiator. But if you prefer air cooling of the processor, then a cooler as high as 17 cm will fit into the case without any problems. A couple of 2.5-inch and the same number of 3.5-inch drives will fit. The maximum length of the graphics card is 32.5 cm (sometimes there are longer ones).

Let there be light!

On the top panel of the FSP CMT270 there are four USB ports (two versions 2.0 and 3.0 each) and a separate button (not combined with Reset) for switching RGB lighting profiles. The case comes with three 12 cm fans: two without backlight and one with addressable ARGB (each LED can flicker in a different colour). An LED hub is also provided with the ability to synchronize with motherboards from all major manufacturers. There are other beautiful and comfortable cases in the FSP assortment: CMT260 without illumination and CMT350, on the contrary, with even more luminous elements.