Elica Ciak Lux GR/A/L/56 stainless steel (PRF0121068B)

Two modifications with a width of 56 and 86 cm

Built-in hood with slider panel Elica Ciak Lux GR/A/L/56, which combines the ability to work with exhaust and recirculation, is used to effectively remove cooking odours from the kitchen. The model has a standard width of 60 cm and is intended to be mounted above a hob of similar dimensions. The working surfaces of the hood are painted in the colour of stainless steel, and the 120 W electric motor installed in the housing consumes only 66 kWh of electricity per year (class E). It provides a maximum airflow of 700 m³/h with a background noise limit of up to 66 dB. To work with overall cooking surfaces, the manufacturer produces a modification of Elica Ciak Lux GR / A / L / 86 with a width of 86 cm, which, with the same performance, provides better air intake from a larger area. Regardless of the modification of the appliance and the type of hob, the minimum installation distance from the lower edge of the hood to the supporting surface of the stove must be at least 50 cm.

LED light

The model can be connected to a Ø 120 mm exhaust duct using a short connecting pipe. Please note that connecting to a smaller diameter vent via an adapter flange will result in reduced performance and increased noise levels. The sliding panel without end plate is completely hidden in the housing when inactive. In the working position, it rolls out by 145 mm on telescopic guides at an angle to the lower plane of the hood. In addition to the complete grease filter, which can be washed safely in the dishwasher, it is also possible to install an active carbon filter (optional) for recirculation operation. Illumination of the working area is provided by an economical paired LED lamp with a total power of 5 watts.