Electrolux LFV 616 Y stainless steel

The advanced LFV 616 Y hood works on the same wavelength with many Electrolux hobs. It communicates wirelessly with the stove, selecting settings for the optimal steam extraction rate according to the heating of the hob.

Relationship with the hob

The relationship between the hood and the stove is established using Hob2Hood technology — this is an automatic control mode via infrared. Depending on the heating of the cooking surface Electrolux LFV 616 Y adjusts the speed of rotation of the built-in fan blades. In total, the hood has 3 speeds, supported by an intensive mode for removing vapors and polluted air.

fresh breeze

At the end of cooking on the hob, the hood is often also sent to “rest”. But if you tap on the “Breeze” mode button, the device will continue to barely audibly clean the air in the kitchen for another 60 minutes. While you are enjoying your meal, the hood slowly removes odours from the air in the kitchen.

Onboard armament

Electrolux LFV 616 Y shines on the surface of the plate with LEDlights, which provide good visibility of the working area. In addition, the model is equipped with a grease filter mesh, and in addition to it, you can buy an ECFB02 type carbon filter to adsorb unpleasant odours. The degree of contamination of the filters helps to monitor the corresponding indication on the control panel of the hood. Finally, the limiting factors from the immediate acquisition of the device are the dependence on a compatible hob and the high cost of the hood.