The best wireless charging pads with MagSafe for multiple gadgets

The Acefast E3 Desktop model saves space on your desktop or bedside table by providing simultaneous wireless charging for three mobile devices: a smartphone, a smart watch and a case with headphones.

The device's smartphone holder has powerful MagSafe magnets built into it, and it is mounted on a support with a variable tilt angle (up to 45°). The phone can be placed on the stand in a vertical or horizontal position, using all functions during the charging procedure. The output power of this slot is adjusted depending on the needs of the gadget - it can be 5 / 7.5 / 10 / 15 W (directly for iPhones, the charging power is 7.5 W).

Behind the panel for the smartphone there is a small “appendage” with a hanging area for charging a smartwatch with a power of 2.5 W. And a charging pad for a case with wireless headphones (5 W) was built into the base of the device. Out of the box, the model is equipped with a removable cable with a USB type C end, but the device is supplied without an AC power adapter.

The operation indicator of Acefast E3 Desktop is an elongated LED strip at the bottom end of the case. The model is installed on a base with non-slip inserts, and ventilation holes are made in the lower segment of the charging device’s body for effective cooling of the “internals”. Coupled with protection against overheating, the charger is not afraid of overvoltage, short circuits and other electrical disasters.

Proda PD-W8 is a practical charger in the form factor of a folding stand with three zones for wireless charging of gadgets using Qi technology.

One round platform was built into the base of the model, which is used to charge a smartphone in a horizontal position or a case with wireless headphones. It produces a maximum of 15 W of charging power. The other two zones are located on the folding part of the device’s body - this is an almost vertical “parking” for a smartphone and a circle for charging a 2.5 W smartwatch (in a suspended state).

The charger from Proda is great for replenishing energy reserves in the battery cells of Apple mobile gadgets. Magnets for correct positioning of the iPhone on the charging zone in the folding part of the model’s body make them easier to handle.

The desktop charging station is equipped with protection against foreign objects, overheating, short circuits, voltage and current surges. And the intelligent power distribution system automatically adjusts the charging process in accordance with the needs of gadgets. For the device to operate correctly, you will need to acquire a network unit that supports Power Delivery and a power of at least 20 W.

For owners of smartphones, watches and headphones from the Apple ecosystem, Choetech’s portfolio has an interesting offer of a wireless charging station - the T585-F model will help charge this entire trinity of mobile gadgets in one fell swoop.

To prevent devices from standing idle in line for charging, the design of the device included three charging areas. The flat base of the Choetech T858-F contains a platform for placing a case with headphones, which produces an output power of 5 W. An inclined “pancake” with MagSafe magnets was attached to the slender leg of the model for precise positioning of the iPhone, and on its back side there was a hanging circle for charging Apple Watch (2.5 W).

The smartphone on the charger stand can be placed either vertically or horizontally. Powerful magnets firmly hold the mobile gadget, preventing it from moving or falling. At the same time, absolutely nothing interferes with the mobile phone when choosing a positioning vector on an inclined platform.

The model is made in a minimalist white design with accents in the form of stainless steel edging. A soft LED operating indication was placed at the bottom end of the device’s body. Well, to power the Choetech T858-F it is supposed to use the supplied cable with a USB type C plug, connected with the reverse end to the power adapter (purchased separately).

Well, Belkin knows how to make really cool accessories for mobile phones. Another confirmation of this “in hardware” is the 3-in-1 wireless charging WIZ009.

The device has a minimalist design with a wide base made of matte plastic and a steel “leg” with a perch, at the ends of which two charging “pancakes” are placed. The larger platform is used to charge the iPhone with a power of up to 15 W, and the smartphone can be installed on it both horizontally and vertically (it is held in place using MagSafe magnets). The smaller “pancake” is the charging area for Apple’s smartwatches.

A wireless charging zone with an output power of 5 W was built into the base of the model’s body. It is supposed to be used to restore the charge of the case with AirPods headphones or to charge a second smartphone (be it an iPhone or any other device that supports Qi wireless charging technology).

Belkin WIZ009 comes with its own power cord, which cannot be replaced with another. However, this model can be forgiven. After all, the main thing is that the charger is Apple MFI certified, which means there is absolutely no risk to Apple technology when using it. In addition, the attention to detail is commendable: the charger is made of high-quality materials and is mounted on a non-slip base that ensures a secure hold of gadgets on all charging slots.

The aluminum charger ZENS ZEDC21B contains four slots for Apple devices: three zones for wireless charging of iPhone, Apple Watch and AirPods, as well as a practical stand for iPad with a USB type C power plug.

The right half of the case is allocated for wireless charging areas in the design of the model. On the leg with a large circle there is a platform for fixing the iPhone in portrait or landscape orientation. MagSafe magnets provide efficient charge transfer with an output power of up to 15 W. The smaller round piece is the area for smart watches (2.5 W), and Apple headphones (5 W) are supposed to be placed in a small recess on the panel.

The left lobe of the device can play the role of a workstation for the iPad. The tablet stand is located at a convenient angle, and in its lower segment there is a height-adjustable USB type C plug(for compatibility with different models of cases). As a bonus, the charger includes a storage slot for x Android OS.

You will need to carve out a lot of free space on your desktop for charging. And ZENS ZEDC21B is not cheap. However, the model fully recoups the investment paid, and it comes with a 45-watt AC power adapter, which is quite a rarity among classmates.